This commit reorganizes the BootInfo struct definition so it can be
shared for all architectures.
The existing free extern "C" boot info variables have been removed and
replaced with a global BootInfo struct, 'g_boot_info'.
On x86-64, the BootInfo is directly copied from the Prekernel-provided
struct.
On AArch64 and RISC-V, BootInfo is populated during pre_init.
The whole concept of Jails was far more complicated than I actually want
it to be, so let's reduce the complexity of how it works from now on.
Please note that we always leaked the attach count of a Jail object in
the fork syscall if it failed midway.
Instead, we should have attach to the jail just before registering the
new Process, so we don't need to worry about unsuccessful Process
creation.
The reduction of complexity in regard to jails means that instead of
relying on jails to provide PID isolation, we could simplify the whole
idea of them to be a simple SetOnce, and let the ProcessList (now called
ScopedProcessList) to be responsible for this type of isolation.
Therefore, we apply the following changes to do so:
- We make the Jail concept no longer a class of its own. Instead, we
simplify the idea of being jailed to a simple ProtectedValues boolean
flag. This means that we no longer check of matching jail pointers
anywhere in the Kernel code.
To set a process as jailed, a new prctl option was added to set a
Kernel SetOnce boolean flag (so it cannot change ever again).
- We provide Process & Thread methods to iterate over process lists.
A process can either iterate on the global process list, or if it's
attached to a scoped process list, then only over that list.
This essentially replaces the need of checking the Jail pointer of a
process when iterating over process lists.
As MMIO is placed at fixed physical addressed, and does not need to be
backed by real RAM physical pages, there's no need to use PhysicalPage
instances to track their pages.
This results in slightly reduced allocations, but more importantly
makes MMIO addresses which end up after the normal RAM ranges work,
like 64-bit PCI BARs usually are.
The new baked image is a Prekernel and a Kernel baked together now, so
essentially we no longer need to pass the Prekernel as -kernel and the
actual kernel image as -initrd to QEMU, leaving the option to pass an
actual initrd or initramfs module later on with multiboot.
This commit adds minimal support for compiler-instrumentation based
memory access sanitization.
Currently we only support detection of kmalloc redzone accesses, and
kmalloc use-after-free accesses.
Support for inline checks (for improved performance), and for stack
use-after-return and use-after-return detection is left for future PRs.
Instead, use the FixedCharBuffer class to ensure we always use a static
buffer storage for these names. This ensures that if a Process or a
Thread were created, there's a guarantee that setting a new name will
never fail, as only copying of strings should be done to that static
storage.
The limits which are set are 32 characters for processes' names and 64
characters for thread names - this is because threads' names could be
more verbose than processes' names.
This has KString, KBuffer, DoubleBuffer, KBufferBuilder, IOWindow,
UserOrKernelBuffer and ScopedCritical classes being moved to the
Kernel/Library subdirectory.
Also, move the panic and assertions handling code to that directory.
"The official project language is American English […]."
5d2e915623/CONTRIBUTING.md (L30)
Here's a short statistic of the occurrences of the word "behavio(u)r":
$ git grep -IPioh 'behaviou?r' | sort | uniq -c | sort -n
2 BEHAVIOR
24 Behaviour
32 behaviour
407 Behavior
992 behavior
Therefore, it is clear that "behaviour" (56 occurrences) should be
regarded a typo, and "behavior" (1401 occurrences) should be preferred.
Note that The occurrences in LibJS are intentionally NOT changed,
because there are taken verbatim from the specification. Hence:
$ git grep -IPioh 'behaviou?r' | sort | uniq -c | sort -n
2 BEHAVIOR
10 behaviour
24 Behaviour
407 Behavior
1014 behavior
This was discovered by me during a work on USB keyboard patches, so it
triggered this bug.
The printing format for the VirtualAddress part is incorrect, leading to
another crash when handling page fault after accessing UNMAP_AFTER_INIT
code section.
Some hardware/software configurations crash KVM as soon as we try to
start Serenity. The exact cause is currently unknown, so just fully
revert it for now.
This reverts commit 897c4e5145.
The new baked image is a Prekernel and a Kernel baked together now, so
essentially we no longer need to pass the Prekernel as -kernel and the
actual kernel image as -initrd to QEMU, leaving the option to pass an
actual initrd or initramfs module later on with multiboot.
Previously we had a race condition in the page fault handling: We were
relying on the affected Region staying alive while handling the page
fault, but this was not actually guaranteed, as an munmap from another
thread could result in the region being removed concurrently.
This commit closes that hole by extending the lifetime of the region
affected by the page fault until the handling of the page fault is
complete. This is achieved by maintaing a psuedo-reference count on the
region which counts the number of in-progress page faults being handled
on this region, and extending the lifetime of the region while this
counter is non zero.
Since both the increment of the counter by the page fault handler and
the spin loop waiting for it to reach 0 during Region destruction are
serialized using the appropriate AddressSpace spinlock, eventual
progress is guaranteed: As soon as the region is removed from the tree
no more page faults on the region can start.
And similarly correctness is ensured: The counter is incremented under
the same lock, so any page faults that are being handled will have
already incremented the counter before the region is deallocated.
This replaces the previous owning address space pointer. This commit
should not change any of the existing functionality, but it lays down
the groundwork needed to let us properly access the region table under
the address space spinlock during page fault handling.
This class had slightly confusing semantics and the added weirdness
doesn't seem worth it just so we can say "." instead of "->" when
iterating over a vector of NNRPs.
This patch replaces NonnullRefPtrVector<T> with Vector<NNRP<T>>.
The handling of page tables is very architecture specific, so belongs
in the Arch directory. Some parts were already architecture-specific,
however this commit moves the rest of the PageDirectory class into the
Arch directory.
While we're here the aarch64/PageDirectory.{h,cpp} files are updated to
be aarch64 specific, by renaming some members and removing x86_64
specific code.
This was previously hardcoded this to be the physical memory range,
since we identity mapped the memory, however we now run the kernel at
a high virtual memory address.
Also changes PageDirectory.h to store up-to 512 pages, as the code now
needs access to more than 4 pages.
These instances were detected by searching for files that include
AK/Memory.h, but don't match the regex:
\\b(fast_u32_copy|fast_u32_fill|secure_zero|timing_safe_compare)\\b
This regex is pessimistic, so there might be more files that don't
actually use any memory function.
In theory, one might use LibCPP to detect things like this
automatically, but let's do this one step after another.
This step would ideally not have been necessary (increases amount of
refactoring and templates necessary, which in turn increases build
times), but it gives us a couple of nice properties:
- SpinlockProtected inside Singleton (a very common combination) can now
obtain any lock rank just via the template parameter. It was not
previously possible to do this with SingletonInstanceCreator magic.
- SpinlockProtected's lock rank is now mandatory; this is the majority
of cases and allows us to see where we're still missing proper ranks.
- The type already informs us what lock rank a lock has, which aids code
readability and (possibly, if gdb cooperates) lock mismatch debugging.
- The rank of a lock can no longer be dynamic, which is not something we
wanted in the first place (or made use of). Locks randomly changing
their rank sounds like a disaster waiting to happen.
- In some places, we might be able to statically check that locks are
taken in the right order (with the right lock rank checking
implementation) as rank information is fully statically known.
This refactoring even more exposes the fact that Mutex has no lock rank
capabilites, which is not fixed here.
Our implementation for Jails resembles much of how FreeBSD jails are
working - it's essentially only a matter of using a RefPtr in the
Process class to a Jail object. Then, when we iterate over all processes
in various cases, we could ensure if either the current process is in
jail and therefore should be restricted what is visible in terms of
PID isolation, and also to be able to expose metadata about Jails in
/sys/kernel/jails node (which does not reveal anything to a process
which is in jail).
A lifetime model for the Jail object is currently plain simple - there's
simpy no way to manually delete a Jail object once it was created. Such
feature should be carefully designed to allow safe destruction of a Jail
without the possibility of releasing a process which is in Jail from the
actual jail. Each process which is attached into a Jail cannot leave it
until the end of a Process (i.e. when finalizing a Process). All jails
are kept being referenced in the JailManagement. When a last attached
process is finalized, the Jail is automatically destroyed.
For the initial page tables we only need to identity map the kernel
image, the rest of the memory will be managed by the MemoryManager. The
linker script is updated to get the kernel image start and end
addresses.
The RTC and CMOS are currently only supported for x86 platforms and use
specific x86 instructions to produce only certain x86 plaform operations
and results, therefore, we move them to the Arch/x86 specific directory.
